Saturday, March 29, 2014

Cold porcelain homemade veiners tutorial

Necessity is the Mother of Invention "I have been involved in cold porcelain since long time, Its required some essential tools but , some times it is impossible to have accurate veiner according to your project. Than I have invented these veiners with the help of cold porcelain.

These are some steps to make homemade veiner.

Step 1: First roll cold porcelain paste up to half inch and cut oval shape with knife tool. Than wait until a thin crust appears on its surface and do not feel any stickiness.

Step 2: Take knife tool, make a deep line in center.

Step 3: Make curve lines from center to end.
Step 4:Than make random, curve, closed and deep lines but do not over lap them, Make each line prominent.
These are some of my homemade veiners.
Hints and tips
1. Always spread cold cream before using these veiners.
2.Wrap off with damp clothe after using.
3. Store in box and protect from moisture

Saturday, March 6, 2010

Cold porcelain Sweet peas

Cold porcelain Sweet peas.

Sweet peas are very fascinating blossoms for me, I have researched a lot about it that how can I make it close to nature, Finally created homemade veiner and cutters and observed details from pictures of it then created these sweet peas with cold porcelain. It has many colours like purple, pink, yellow, red and blue , but I adopted pink.

Join my network to learn more about cold porcelain.

Thursday, December 10, 2009

Cold Porcelain basket

Few days back me and my niece were preparing cold porcelain but glue was containing lots of laps, For dissolving laps I added more than one a cup of water, When cooked it we realized that it was so soft and crumbled, My niece was disappointed than I decided to do some fun with it, I was started to make long and thick strips of porcelain and placing on the bottom of bowl. It took a week to dry up completely than I cover the edges of bowl. My niece is so delighted to see the result.

Monday, July 27, 2009

Homemade cold porcelain cutter making

When we work with cold porcelain the all essential tools and cutter are always needed. But some times we are unable to get accurate cutter according to the project. I have faced this situation many times than got idea to make homemade cutters and its might be my invention. These are all homemade cutters.

I made it easy first we need Aluminium sheet or tin sheet (which is available in hardware shops) Scissor, pen, margin scale, steel bond. One thing is most important is the wooden block and hammer two size nails on the wooden block the nails will help to get shape and curves of cutter.

Step 1: draw a margin about one inch wide and cut it with scissor.

Step 2: again draw margin in between the stripe and make it double. Press it with any heavy object to get flatten and smooth stripe.

Step 3: make a diagram according to your choice then measure it with thick thread.

Step 4: cut the thread place on Aluminium stripe .

Step 5: mark according to the size of thread and increase half inch more. Apply steel bond at the ends of tin stripe (bond always join well when it dried completely) overlap and join both ends then the stripe will turn in ring shape.

Step 6: at the joining point push tin ring two times outside and make sure gap should be about half inch. It will be shape like a petal then grab the center again push outside with the help of nail. When leaf shape come up make cuts with scissor. This leaf cutter could be use from both sides.

Tuesday, May 19, 2009

Cold porcelain Tube rose tutorial

Cold Porcelain Tube Rose

These are tube rose made from cold porcelain. I often wash them than dry it with hair dryer. They are long last and never lose color and shape.